防撞墙水沟挡墙塑料模板的主要作用是防止墙体出现裂缝或者断裂现象。在施工过程中，由于各种因素的影响，如温度、湿度、震动等，墙体容易出现开裂或者断裂的情况，从而影响到建筑物的结构安全。而使用防撞墙水沟挡墙塑料模板可以有效地避免这些问题的发生，保证墙体的完整性和稳定性。模板采用现场浇筑的方式进行制作，直接在现场进行模具的组装，然后进行混凝土的浇筑，浇筑的同时要搭配振动棒进行搅拌，排除浇筑混凝土是产生的气泡，等待混凝土干透以后进行脱模，就可以进行使用了，现场浇筑的方法进行制作更加方便，按照施工的要求进行制作的，符合施工方的制作要求。在混凝土浇筑完成后，需要对其进行养护和保温，以确保混凝土的强度和稳定性。根据气候条件和混凝土类型，采取适当的养护措施，如喷水养护、覆盖保温等。The main function of the plastic formwork for anti-collision walls, ditches, and retaining walls is to prevent cracks or fractures in the wall. During the construction process, due to various factors such as temperature, humidity, vibration, etc., walls are prone to cracking or breaking, thereby affecting the structural safety of buildings. The use of anti-collision walls, ditches, and plastic formwork for retaining walls can effectively avoid these problems and ensure the integrity and stability of the wall. The template is made by on-site pouring, where the mold is directly assembled on site and then the concrete is poured. During pouring, a vibrating rod is used to mix and eliminate any air bubbles that may occur during pouring