桥梁涵洞塑料模板在桥梁和涵洞的施工过程中发挥关键的作用，帮助实现结构的准确定型。模板采用现场浇筑的方式进行制作，直接在现场进行模具的组装，然后进行混凝土的浇筑，浇筑的同时要搭配振动棒进行搅拌，排除浇筑混凝土是产生的气泡，等待混凝土干透以后进行脱模，就可以进行使用了，现场浇筑的方法进行制作更加方便，按照施工的要求进行制作的，符合施工方的制作要求。塑料模板拆模后应立即对模板表面进行清理干净，方便以后使用。模板如果需要长期存储应该在其表面涂抹油剂，堆放整齐并且要保持干燥清洁；在运输和存储过程中要避免日晒，否则会引起模板裂纹，变形，老化现象出现。The template is made by on-site pouring, where the mold is directly assembled on site and then the concrete is poured. During pouring, a vibrating rod is used to mix and eliminate any air bubbles that may occur during pouring. After the concrete is completely dry, the template can be demolded and used. The on-site pouring method is more convenient to make, and it is made according to the construction requirements, which meets the production requirements of the construction party.