混凝土风电塔筒定型钢模板是指用于浇灌风电塔筒子的模板。它主要由模板骨架、模板桩、调整钢托等组成。使用时，需要先根据设计要求确定好模板的尺寸，然后依次安装模板的骨架、桩和钢托，直至全部安装完成。在浇灌混凝土时，需要注意要均匀振捣，以充分保证混凝土的质量。混凝土发电塔筒定型钢模板结构采用组合式，易于拆除，方便工人操作，模具采用优质钢板生产，再用电焊机等机器设备加工，降低了工人的工作难度，使整个生产速度更快。

利用混凝土风电塔筒定型钢模板制作风电基础，主要是通过浇筑混凝土来制作风力发电基础底座。选择性能较好的混凝土作为主料，然后将混凝土用水和砂搅拌。搅拌的混凝土包含许多气泡所以需要震动排气。如果不振动，生产出来的风电基础底座表面会出现大量的蜂窝，并且牢固度也会降低。通过振动混凝土，排出其中所含的空气，有效地提高混凝土的密度。

The use of concrete wind power tower shaped steel templates to make wind power foundations is mainly achieved by pouring concrete to make wind power foundation bases. Select concrete with good performance as the main material, and then mix the concrete with water and sand. The mixed concrete contains many bubbles, so vibration and exhaust are required. If there is no vibration, a large number of honeycombs will appear on the surface of the produced wind power foundation base, and the firmness will also decrease. By vibrating the concrete, the air contained in it is discharged, effectively increasing the density of the concrete.