风电基础模具常见的组成形状为圆形的，也会有八道梁形状与十二道梁形状的，形状会有些不同，但是使用的效果是相同的，都是作为风力发电机的底座进行使用，使用模具进行制作是非常简单的，只需要将模具拼接好，然后在模具的内侧进行混凝土的浇筑，放置大量的钢筋网进行与上圈的连接，这样制作出来的混凝土预制件才会更加的坚固，能够长时间的进行使用。

风电基础模具可以称之为一个大圆圈，按照圆圈的高度以及直径大小进行模具的分块、弧度等技术方面问题分析，一般直径在15-20米，高度在1.2米，这就是风电基础模具中下圈模具的尺寸，而上圈的尺寸基本比小圈小一倍，但是高度要搞一些。混凝土风电基础使用的混凝土都是C30以上的，要求的强度比较高，这也是对风电设施负责任施工的表现。

The basic mold for wind power can be called a large circle. Based on the height and diameter of the circle, technical issues such as mold segmentation and curvature are analyzed. Generally, the diameter is 15-20 meters, and the height is 1.2 meters. This is the size of the lower circle mold in the basic mold for wind power, while the size of the upper circle is basically twice that of the small circle, but the height needs to be improved. The concrete used in the foundation of concrete wind power is C30 or higher, and the required strength is relatively high, which is also a manifestation of responsible construction for wind power facilities.