护坡拱形骨架模具的简介是从多个角度介绍的，在生产该模具的时候要保证结构的可靠性， 在灌入混凝土的时候不会出现漏浆的状况，保证混凝土振动成型的均匀程度，我们会先安装好模具使用的支架让其好好固定，需要能够承受混凝土的自重和压力， 在进行施工之前要对护坡模具的支架、筋板厚度和预留孔的位置进行检查，没有差错之后才能记性浇筑，使用连续浇筑的方式不能中断，这样才符合生产要求。护坡拱形骨架模具的适应能力强，但并不是所有的边坡都合适，一般坡高在五米左右，坡道在三十五度以下的土质坡道都是可以使用的，主要的作用就是防止水土流失引起的滑坡，这样会危害到坡道中间道路的安全。护坡拱形骨架模具的基础是从下到上开挖的，而没有挖到的地方，就是为了种植草木，在进行浇筑的时候也是从下面开始的，而且每一条混凝土骨架的顶面应该设置一个排水沟，同时要保证排水沟的顺直程度，保证其从上到下是贯通的。

The introduction of the arched skeleton mold for slope protection is introduced from multiple perspectives. When producing the mold, it is necessary to ensure the reliability of the structure, avoid leakage of grout when pouring concrete, and ensure the uniformity of concrete vibration molding. We will first install the support used for the mold to ensure it is properly fixed, and it needs to be able to withstand the weight and pressure of the concrete. Before construction, the support for the slope protection mold should be inspected Check the thickness of the reinforcement plate and the position of the reserved holes, and only after there are no errors can the pouring be recorded. The continuous pouring method cannot be interrupted, so as to meet the production requirements. The adaptability of the arch skeleton mold for slope protection is strong, but not all slopes are suitable. Generally, soil slopes with a slope height of about five meters and a slope below 35 degrees can be used. The main function is to prevent landslides caused by soil erosion, which can endanger the safety of the road in the middle of the slope. The foundation of the arched skeleton mold for slope protection is excavated from bottom to top, and the places that are not excavated are for planting vegetation. When pouring, it also starts from the bottom, and a drainage ditch should be set up on the top surface of each concrete skeleton, while ensuring the straightness of the drainage ditch and its continuity from top to bottom.